Development and characterization of thermoplastic films from sorghum distillers dried grains grafted with various
Narendra Reddy1, Zhen Shi, Lisa Temme
1Department of Textiles, Merchandising & Fashion Design, 234 HECO Building, East Campus, University of Nebraska-Lincoln , Lincoln, Nebraska 68583-0803, United States.
Abstract:
Distillers Dried Grains (DDG) obtained during production of ethanol from grain sorghum were grafted with methacrylates and compression molded into films with good dry and wet tensile properties. Since sorghum DDG contains up to 45% proteins that are indigestible by animals, it is necessary to find alternative applications to make sorghum ethanol economically competitive. In this research, sorghum DDG was grafted with methyl, ethyl, and butyl methacrylates, the grafted DDG was compression molded into films, and the properties of the grafted DDG and films were studied. At a grafting ratio of 40%, butyl methacrylate (BMA) grafted films had a strength of 4.8 MPa and elongation of 1.8% when dry and 3.1 MPa and 8.1% when wet, indicating that the films had good strength and wet stability. Films developed from grafted DDG show the potential to overcome the brittleness and poor water stability of biopolymer-based films and be useful for various applications.
Related Concept Videos
Bioplastics
Types of Step-Growth Polymers: Polyesters
Polyesters are commonly prepared from terephthalic acid and ethylene glycol; the crude product is known as poly(ethylene terephthalate) or PET. However, polyesters are synthesized industrially by transesterification of dimethyl terephthalate with ethylene glycol at 150 °C. The two reactants and the...
Polymer Classification: Stereospecificity


