Related Experiment Video
Updated: May 2, 2026

Relating Stomatal Conductance to Leaf Functional Traits
Published on: October 12, 2015
[Study on quality standard of Chimonanthus nitens leaf]
Objective:
To set up the quality standard of Chimonanthus nitens leaf.
Methods:
Five compounds were identified by double-development thin layer chromatography, the plate was colorized with 1% vanillin-H2 SO4 solution and warmed up in 110 degrees C; The content of four compounds was determined by HPLC, the chromatography separation was performed on the Elite hypersil ODS2 (250 mm x 4.6 mm, 5 microm) column with gradient elution. The mixture of acetonitrile and water as the mobile phase at a flow rate of 1.0 mL/min was used, the detection wavelength was 344 nm and the column temperature was set at 40 degrees C.
Results:
The TLC identification was highly specific and spots were clear. In HPLC method, the calibration curve was linear in the range of 5.665 - 56.65 microg/mL for scopoletin (r = 0.9999), the average recovery was 97.06% and RSD was 1.27%; The calibration curve was linear in the range of 2.4312 - 24.312 microg/mL for isofraxidin (r = 0.9999), the average recovery was 102.86% and RSD% was 0.93%; The calibration curve presented a linear range from 2.444 - 24.44 microg/mL for scoparone (r = 0.9999), the average recovery was 102.18% and RSD was 1.81%. The standard curve presented a linear range from 9.012 - 90.12 microg/mL for rutin (r = 0.9992), the average recovery was 104.44% and RSD was 4.2%.
Conclusion:
These methods are reproducible, sensitive and simple and can be used to control the quality of Chimonanthus nitens leaf.
Related Concept Videos
Key Elements for Plant Nutrition
Light Acquisition

