Biofuel cell for generating power from methanol substrate using alcohol oxidase bioanode and air-breathed laccase...

We report here an alcohol oxidase (AOx) based third generation bioanode for generating power from methanol substrate in a fuel cell setup using air breathed laccase biocathode. A composite three dimensional microporous matrix containing multiwalled carbon nanotubes, carbon paste and nafion was used as electroactive support for immobilization of the enzymes on toray carbon paper as supporting electrode in the fabrication of the bioelectrodes. Polyethylenimine was used to electrostatically stabilize the AOx (pI 4.3) on the anode operating on direct electrochemistry principle. Osmium tetroxide on poly (4-vinylpyridine) was used to wire the laccase for electron transfer in the biocathode. The enzymatic biofuel cell (EFC) generated an open circuit potential of 0.61 (±0.02) V with a maximum power density of 46 (±0.002) µW cm(-2) at an optimum of 1M methanol, 25 °C and an internal resistance of 0.024 µΩ. The operation and storage half life (t1/2) of the EFC were 17.22 h and 52 days, respectively at a fixed load of 1.85 Ω. The findings have demonstrated the feasibility of developing EFC using AOx based bioanode and laccase based biocathode without applying any toxic free mediator and metal electrode supports for generating electricity.