Monomer priming of denture teeth and its effects on the bond strength of composite resin

The bond strength of acrylic resin denture teeth used as pontics in fiber-reinforced composite fixed dental prostheses needs to be improved.

The purpose of this study was to assess the influence of various chemical surface-conditioning monomers on the ridge-lap surface of acrylic resin denture teeth by determining the strength of their bonding to a composite resin and changes in surface hardness.

Acrylic resin denture teeth of 2 different brands (Artic 8 and Vitapan Cuspiform) (n=120) were tested. Four monomer systems were used as surface primers (conditioning): a flowable composite resin, methylmethacrylate 99%, composite primer, and a photopolymerizable dimethacrylate resin. Five surface-conditioning exposure times were used: no conditioning, 1, 5, 15, and 60 minutes. Surface microhardness measurements were made after the application of the monomer systems. Shear bond strength tests were subsequently performed, followed by a new surface microhardness indentation after the application of the load. The evaluation of the changes on specimen surfaces was performed with a scanning electron microscope. The differences between the shear bond strength and the surface hardness were evaluated for statistical significance by using a 3-way ANOVA.

Tooth brand, monomer used, exposure time, and their 2- and 3-way interactions had a significant effect on the shear bond strength and hardness before and after testing, except for the 3-way interaction effect on hardness before testing.

The chemical pretreatment of the ridge-lap surface of acrylic resin denture teeth increased the shear bond strength and influenced the surface hardness. The monomer systems caused dissolution on the denture surfaces.