Related Experiment Video
Updated: Apr 29, 2026

A Structured Rehabilitation Protocol for Improved Multifunctional Prosthetic Control: A Case Study
Published on: November 6, 2015
Support vector regression for improved real-time, simultaneous myoelectric control
Abstract:
This study describes the first application of a support vector machine (SVM) based scheme for real-time simultaneous and proportional myoelectric control of multiple degrees of freedom (DOFs). Three DOFs including wrist flexion-extension, abduction-adduction and forearm pronation-supination were investigated with 10 able-bodied subjects and two individuals with transradial limb deficiency (LD). A Fitts' law test involving real-time target acquisition tasks was conducted to compare the usability of the SVM-based control system to that of an artificial neural network (ANN) based method. Performance was assessed using the Fitts' law throughput value as well as additional metrics including completion rate, path efficiency and overshoot. The SVM-based approach outperformed the ANN-based system in every performance measure for able-bodied subjects. The SVM outperformed the ANN in path efficiency and throughput with the first LD subject and in throughput with the second LD subject. The superior performance of the SVM-based system appears to be due to its higher estimation accuracy of all DOFs during inactive and low amplitude segments (these periods were frequent during real-time control). Another advantage of the SVM-based method was that it substantially reduced the processing time for both training and real time control.
Related Concept Videos
Motor Unit Stimulation
The latent period of contraction marks the onset of excitation-contraction coupling, when the action potential propagates across the sarcolemma, preparing the muscle fibers for contraction. As the fibers enter the contraction phase, the...
Open and closed-loop control systems
An open-loop control system operates without feedback from the output. It consists of two primary elements: the controller and the controlled process. The controller receives an input signal...
Feedback control systems
Linear feedback systems are theoretical models that simplify analysis and design. These systems operate under the principle that their output is directly proportional to their input within certain ranges. For instance, an amplifier in a control system behaves linearly as long as the input signal remains within a specific range. However, most physical systems exhibit inherent nonlinearity...

