[A novel method for testing sterility of injections based on biothermodynamics]

This study aims at trying to establish a novel method of sterility test for injections based on biothermodynamics, in order to overcome the deficiencies of routine sterility tests such as long detecting cycle, low sensitivity and prone to misjudgments. A biothermodynamics method was adopted to rapidly detect the microorganism contamination of injections by monitoring the heat metabolism during the growth of microbe. The growth rate equal to or greater than zero and the heat power difference of P(i) and P(0) with three folds higher than the noise of baseline were chosen as indexes to study the heat change rule of microbe. In this way, the effectiveness of the new method to detect strains required by conventional sterility test or in injection samples was also investigated. Results showed that the Gram-positive bacteria, Gram-negative bacteria and fungi demanded by sterility testing methodology could be detected by biothermodynamics method within 10 hours, with the sensitivity lower than 100 CFU x mL(-1). Meanwhile, this method was successfully applied to the sterility test of Compound Yinchen injection (FFYC), Shuanghuanglian powder injection (SHL) and Compound Triamcinolone injection (TAND) which were sterilized with different degrees. Therefore, the biothermodynamics method, with advantages of fast detection and high sensitivity, could be a complementary solution for conventional sterility tests.