Related Experiment Video

Updated: Apr 27, 2026

Vapor Phase Deposition of Electroactive Poly(3,4-ethylenedioxythiophene) onto Electrospun Commodity Polymer Nanofibers
08:28

Vapor Phase Deposition of Electroactive Poly(3,4-ethylenedioxythiophene) onto Electrospun Commodity Polymer Nanofibers

Published on: March 7, 2025

1.9K

Enhanced performance of polymer solar cells using PEDOT:PSS doped with Fe3O4 magnetic nanoparticles aligned by an

Kai Wang1, Chao Yi, Xiaowen Hu

  • 1College of Polymer Science and Polymer Engineering and ⊥Department of Chemical and Biomolecular Engineering, The University of Akron , Akron, Ohio 44325, United States.

ACS Applied Materials & Interfaces
|July 2, 2014
PubMed

More Related Videos

In situ Grazing Incidence Small Angle X-ray Scattering on Roll-To-Roll Coating of Organic Solar Cells with Laboratory X-ray Instrumentation06:49

In situ Grazing Incidence Small Angle X-ray Scattering on Roll-To-Roll Coating of Organic Solar Cells with Laboratory X-ray Instrumentation

Published on: March 2, 2021

6.8K
Spray-Coated Melanin/PEDOT:PSS Films for Sustainable Organic Electrochemical Transistors08:26

Spray-Coated Melanin/PEDOT:PSS Films for Sustainable Organic Electrochemical Transistors

Published on: October 28, 2025

872

Related Concept Videos

P-N junction01:11

P-N junction

A p-n junction is formed when p-type and n-type semiconductor materials are joined together. At the interface of the p-n junction, holes from the p-side and electrons from the n-side begin to diffuse into the opposite sides due to the concentration gradient. This diffusion of carriers leads to a region around the junction where there are no free charge carriers, known as the depletion region. The charge density within the depletion region for the n-side and p-side can be described by the...
1.6K