Related Experiment Video

Updated: Apr 22, 2026

Author Spotlight: Microfluidic Channel-Based Soft Electrodes and Their Application in Capacitive Pressure Sensing
05:57

Author Spotlight: Microfluidic Channel-Based Soft Electrodes and Their Application in Capacitive Pressure Sensing

Published on: March 17, 2023

4.3K

A CMOS micromachined capacitive tactile sensor with integrated readout circuits and compensation of process

Tsung-Heng Tsai, Hao-Cheng Tsai, Tien-Keng Wu

    IEEE Transactions on Biomedical Circuits and Systems
    |October 15, 2014
    PubMed

    More Related Videos

    Dynamic Multiparameter Platelet Function Assessment Using a Capacitive Biosensor06:32

    Dynamic Multiparameter Platelet Function Assessment Using a Capacitive Biosensor

    Published on: May 2, 2025

    915
    Sensitivity Enhancement of Soft Capacitive Pressure Sensors Using a Solvent Evaporation-Based Porosity Control Technique10:28

    Sensitivity Enhancement of Soft Capacitive Pressure Sensors Using a Solvent Evaporation-Based Porosity Control Technique

    Published on: March 24, 2023

    2.9K

    Related Concept Videos

    MOS Capacitor01:25

    MOS Capacitor

    A Metal-Oxide-Semiconductor (MOS) capacitor is a fundamental structure used extensively in semiconductor device technology, particularly in the fabrication of integrated circuits and MOSFETs (metal-oxide-semiconductor field-effect transistors). The MOS capacitor consists of three layers: a metal gate, a dielectric oxide, and a semiconductor substrate.
    The metal gate is typically made from highly conductive materials such as aluminum or polysilicon. Beneath the metal gate lies a thin layer of...
    1.8K
    Design Example: Capacitance Multiplier Circuit01:20

    Design Example: Capacitance Multiplier Circuit

    In integrated circuit technology, a capacitance multiplier is often utilized to produce a larger capacitance value when a small physical capacitance falls short. This is achieved by a circuit that multiplies capacitance values by a factor of up to 1000, such that a 10-pF capacitor can replicate the performance of a 100-nF capacitor.
    The circuit illustrated in Figure 1 below incorporates two op-amps, with the first operating as a voltage follower and the second acting as an inverting amplifier.
    1.8K
    Design Example: Resistive Touchscreen01:14

    Design Example: Resistive Touchscreen

    A device engineer plays a crucial role in designing user interfaces for mobile devices. One such interface is the resistive touchscreen, which fundamentally consists of two metallic layers: a flexible upper layer and a rigid lower layer, separated by a narrow gap. The high resistance between these two layers is a key characteristic of this design.
    When a user touches the screen, the two layers make contact at a specific point known as the touchpoint. This contact reduces the resistance between...
    928