Improved photoelectrical properties of n-ZnO/p-Si heterojunction by inserting an optimized thin Al₂O₃ buffer layer
Optics Express
|October 17, 2014
Abstract:
The n-ZnO/p-Si heterojunction with an ultrathin Al₂O₃ buffer layer was prepared by atomic layer deposition. X-ray diffraction revealed that the crystalline quality of (100)-oriented ZnO films was improved with an Al₂O₃ buffer layer. The n-ZnO/p-Si heterojunction with 5 nm inserted Al₂O₃ layer shows the best electrical characteristics, with a dark current of 0.5 μA at a reverse bias of -2 V and increasing the photo-to-dark current ratio effectively by 8 times. These results demonstrated that Al₂O₃ buffer layer with optimized thickness exhibits significant advantages in enhancing the crystal quality of ZnO film and improving the photoelectrical properties of n-ZnO/p-Si photodetectors.
More Related Videos
Related Concept Videos
P-N junction
1.6K
A p-n junction is formed when p-type and n-type semiconductor materials are joined together. At the interface of the p-n junction, holes from the p-side and electrons from the n-side begin to diffuse into the opposite sides due to the concentration gradient. This diffusion of carriers leads to a region around the junction where there are no free charge carriers, known as the depletion region. The charge density within the depletion region for the n-side and p-side can be described by the...
1.6K
Metal-Semiconductor Junctions
1.4K
The contact of metal and semiconductor can lead to the formation of a junction with either Schottky or Ohmic behavior.
Schottky Barriers
Schottky barriers arise when a metal with a work function (Φm) contacts a semiconductor with a different work function (Φs). Initially, electrons transfer until the Fermi levels of the metal and semiconductor align at equilibrium. For instance, if Φm > Φs, the semiconductor Fermi level is higher than the metal's before contact. The...
Schottky Barriers
Schottky barriers arise when a metal with a work function (Φm) contacts a semiconductor with a different work function (Φs). Initially, electrons transfer until the Fermi levels of the metal and semiconductor align at equilibrium. For instance, if Φm > Φs, the semiconductor Fermi level is higher than the metal's before contact. The...
1.4K


