Related Experiment Video
Updated: Apr 21, 2026

Development of Sulfidogenic Sludge from Marine Sediments and Trichloroethylene Reduction in an Upflow Anaerobic Sludge Blanket Reactor
Published on: October 15, 2015
Reduction of diffusive contaminant emissions from a dissolved source in a lower permeability layer by sodium
Bridget A Cavanagh1, Paul C Johnson, Eric J Daniels
1School of Sustainable Engineering and the Built Environment, Ira A Fulton Schools of Engineering, Arizona State University , Tempe, Arizona 85287, United States.
Abstract:
Residual contamination contained in lower permeability zones is difficult to remediate and can, through diffusive emissions to adjacent higher permeability zones, result in long-term impacts to groundwater. This work investigated the effectiveness of oxidant delivery for reducing diffusive emissions from lower permeability zones. The experiment was conducted in a 1.2 m tall × 1.2 m wide × 6 cm thick tank containing two soil layers having 3 orders of magnitude contrast in hydraulic conductivity. The lower permeability layer initially contained dissolved methyl tert-butyl ether (MTBE) and benzene, toluene, ethylbenzene, and p-xylenes (BTEX). The treatment involved delivery of 10% w/w nonactivated sodium persulfate (Na2S2O8) solution to the high permeability layer for 14 days. The subsequent diffusion into the lower permeability layer and contaminant emission response were monitored for about 240 days. The S2O8(2-) diffused about 14 cm at 1% w/w into the lower permeability layer during the 14 day delivery and continued diffusing deeper into the layer as well as back toward the higher-lower permeability interface after delivery ceased. Over 209 days, the S2O8(2-) diffused 60 cm into the lower permeability layer, the BTEX mass and emission rate were reduced by 95-99%, and the MTBE emission rate was reduced by 63%. The overall treatment efficiency was about 60-110 g-S2O8(2-)delivered/g-hydrocarbon oxidized, with a significant fraction of the oxidant delivered likely lost by back-diffusion and not involved in hydrocarbon destruction.
Related Concept Videos
Sample Preparation for Analysis: Advanced Techniques
Acid digestion with strong acids is commonly used to dissolve inorganic materials that are insoluble (do not dissolve) in water. This method can be useful for...
Precipitation and Co-precipitation
Microbial Bioremediation of Uranium
Colloidal precipitates
Microbial Leaching
Factors Affecting Solubility

