Porous chitosan doped with graphene oxide as highly effective adsorbent for methyl orange and amido black 10B
Related Experiment Video
Updated: Apr 20, 2026
Preparation of Biomass-based Mesoporous Carbon with Higher Nitrogen-/Oxygen-chelating Adsorption for CuII Through Microwave Pre-Pyrolysis
Published on: February 12, 2019
Ying Wang1, Guangmei Xia2, Cong Wu1
1College of Chemistry and Chemical Engineering, University of Chinese Academy of Sciences, Beijing 100049, China.
Abstract:
In the current study, porous chitosan aerogels doped with small amount of graphene oxide (CSGO aerogels) with high porosity (97.96-98.78%), extraordinarily high water absorption (5848-8917%) and low density (0.021-0.035 g cm(-3)) were prepared and used as adsorbents for two azo dyes methyl orange (MO) and amido black 10B (AB10B). The adsorption behavior of these CSGO aerogels and some influence factors such as pH value, graphene oxide (GO) loading, concentration of pollutants, as well as adsorption kinetics were studied. Specifically, the adsorption capacity for MO is 686.89 mg g(-1), the highest comparing with other publication results, and it is 573.47 mg g(-1) for AB10B. Since they are biodegradable, non-toxic, efficient, low-cost and easy to prepare, we believe that these porous CSGO aerogels will be a promising candidate for dye removal.
