Related Experiment Video

Updated: Apr 18, 2026

Applying Dynamic Strain on Thin Oxide Films Immobilized on a Pseudoelastic Nickel-Titanium Alloy
09:35

Applying Dynamic Strain on Thin Oxide Films Immobilized on a Pseudoelastic Nickel-Titanium Alloy

Published on: July 28, 2020

5.5K

Superelastic properties of biomedical (Ti-Zr)-Mo-Sn alloys

Muhammad Farzik Ijaz1, Hee Young Kim1, Hideki Hosoda2

  • 1Division of Materials Science, University of Tsukuba, Tsukuba, Ibaraki 305-8573, Japan.

Materials Science & Engineering. C, Materials for Biological Applications
|January 13, 2015
PubMed

Keywords:
BiomaterialMartensitic transformationRecrystallization textureSuperelasticityTi alloy

More Related Videos

Fabrication of Mechanically Tunable and Bioactive Metal Scaffolds for Biomedical Applications09:56

Fabrication of Mechanically Tunable and Bioactive Metal Scaffolds for Biomedical Applications

Published on: December 8, 2015

11.3K
Rapid Formation and Testing of Self-expanding NiTi Frames with a Small Form Factor Suitable for Minimally Invasive Implants06:48

Rapid Formation and Testing of Self-expanding NiTi Frames with a Small Form Factor Suitable for Minimally Invasive Implants

Published on: March 7, 2025

879

Related Concept Videos

Hooke's Law01:26

Hooke's Law

Hooke's law, a pivotal principle in material science, establishes that the strain a material undergoes is directly proportional to the applied stress, defined by a factor called the modulus of elasticity or Young's modulus.
2.0K
Strain and Elastic Modulus01:15

Strain and Elastic Modulus

The quantity that describes the deformation of a body under stress is known as strain. Strain is given as a fractional change in either length, volume, or geometry under tensile, volume (also known as bulk), or shear stress, respectively, and is a dimensionless quantity. The strain experienced by a body under tensile or compressive stress is called tensile or compressive strain, respectively. In contrast, the strain experienced under bulk stress and shear stress is known as volume and shear...
9.3K
Relation between Poisson's ratio, Modulus of Elasticity and Modulus of Rigidity01:15

Relation between Poisson's ratio, Modulus of Elasticity and Modulus of Rigidity

Deformation occurs in axial and transverse directions when an axial load is applied to a slender bar. This deformation impacts the cubic element within the bar, transforming it into either a rectangular parallelepiped or a rhombus, contingent on its orientation. This transformation process induces shearing strain. Axial loading elicits both shearing and normal strains. Applying an axial load instigates equal normal and shearing stresses on elements oriented at a 45° angle to the load axis.
786