Related Experiment Video
Updated: Apr 18, 2026

Clinical Imaging of Microwave Mammography
Published on: November 14, 2025
Average dielectric property analysis of complex breast tissue with microwave transmission measurements
John D Garrett1, Elise C Fear2
1Schulich School of Engineering, University of Calgary, 2500 University Dr. NW, Calgary AB T4N 1N4, Canada. garrettj@ucalgary.ca.
Abstract:
Prior information about the average dielectric properties of breast tissue can be implemented in microwave breast imaging techniques to improve the results. Rapidly providing this information relies on acquiring a limited number of measurements and processing these measurement with efficient algorithms. Previously, systems were developed to measure the transmission of microwave signals through breast tissue, and simplifications were applied to estimate the average properties. These methods provided reasonable estimates, but they were sensitive to multipath. In this paper, a new technique to analyze the average properties of breast tissues while addressing multipath is presented. Three steps are used to process transmission measurements. First, the effects of multipath were removed. In cases where multipath is present, multiple peaks were observed in the time domain. A Tukey window was used to time-gate a single peak and, therefore, select a single path through the breast. Second, the antenna response was deconvolved from the transmission coefficient to isolate the response from the tissue in the breast interior. The antenna response was determined through simulations. Finally, the complex permittivity was estimated using an iterative approach. This technique was validated using simulated and physical homogeneous breast models and tested with results taken from a recent patient study.
More Related Videos
Related Concept Videos
Susceptibility, Permittivity and Dielectric Constant
Dielectric Polarization in a Capacitor
Bode Plots Construction
Electromagnetic Waves in Matter
Consider the electromagnetic wave passing through a dielectric medium. In such a case, Maxwell's equations get modified. In Ampere's law, ε0 , the dielectric permittivity of free space is replaced with ε, the permittivity of dielectric. Also, the vacuum permeability μ0 is replaced by the permeability of the medium,...
Standing Waves in a Cavity
Electrostatic Boundary Conditions in Dielectrics
Consider a case where both the mediums across a boundary are two different dielectric materials. Recall that the electric field and electric displacement are proportional and related through the material's permittivity....

