Related Experiment Video
Updated: Apr 15, 2026

In Situ Lithiated Reference Electrode: Four Electrode Design for In-operando Impedance Spectroscopy
Published on: September 12, 2018
Analysis of bio-anode performance through electrochemical impedance spectroscopy
Annemiek ter Heijne1, Olivier Schaetzle2, Sixto Gimenez3
1Sub-department of Environmental Technology, Wageningen University, Bornse Weilanden 9, P.O. Box 17, 6700 AA Wageningen, The Netherlands.
Abstract:
In this paper we studied the performance of bioanodes under different experimental conditions using polarization curves and impedance spectroscopy. We have identified that the large capacitances of up to 1 mF·cm(-2) for graphite anodes have their origin in the nature of the carbonaceous electrode, rather than the microbial culture. In some cases, the separate contributions of charge transfer and diffusion resistance were clearly visible, while in other cases their contribution was masked by the high capacitance of 1 mF·cm(-2). The impedance data were analyzed using the basic Randles model to analyze ohmic, charge transfer and diffusion resistances. Increasing buffer concentration from 0 to 50mM and increasing pH from 6 to 8 resulted in decreased charge transfer and diffusion resistances; lowest values being 144 Ω·cm(2) and 34 Ω·cm(2), respectively. At acetate concentrations below 1 mM, current generation was limited by acetate. We show a linear relationship between inverse charge transfer resistance at potentials close to open circuit and saturation (maximum) current, associated to the Butler-Volmer relationship that needs further exploration.
Related Concept Videos
Electrogravimetric Analysis: Overview
To test the completeness of the...
Processes at Electrodes
Interfacial Electrochemical Methods: Overview
Electrodeposition
Electrodeposition can...
Amperometry: Overview

