Analysis of the effects of curvature and thickness on elastic wave velocity in cornea-like structures by finite
Zhaolong Han1, Jiasong Li1, Manmohan Singh1
1Department of Biomedical Engineering, University of Houston , Houston, Texas 77204, USA.
Abstract:
Wave models that have been used to extract the biomechanical properties of the cornea from the propagation of an elastic wave are based on an assumption of thin-plate geometry. However, this assumption does not account for the effects of corneal curvature and thickness. This study conducts finite element (FE) simulations on four types of cornea-like structures as well as optical coherence elastography (OCE) experiments on contact lenses and tissue-mimicking phantoms to investigate the effects of curvature and thickness on the group velocity of an elastic wave. The elastic wave velocity as determined by FE simulations and OCE of a spherical shell section decreased from ∼2.8 m/s to ∼2.2 m/s as the radius of curvature increased from 19.1 mm to 47.7 mm and increased from ∼3.0 m/s to ∼4.1 m/s as the thickness of the agar phantom increased from 1.9 mm to 5.6 mm. Both the FE simulation and OCE results confirm that the group velocity of the elastic wave decreases with radius of curvature but increases with thickness. These results demonstrate that the effects of the curvature and thickness must be considered in the further development of accurate wave models for reconstructing biomechanical properties of the cornea.
