Related Experiment Video
Updated: Apr 6, 2026

Ultrasonic Fatigue Testing in the Tension-Compression Mode
Published on: March 7, 2018
Locating and characterizing a crack in concrete with diffuse ultrasound: A four-point bending test
Eric Larose1, Anne Obermann2, Angela Digulescu3
1ISTerre, CNRS, BP 53, 38041 Grenoble cedex 9, France.
Abstract:
This paper describes an original imaging technique, named Locadiff, that benefits from the diffuse effect of ultrasound waves in concrete to detect and locate mechanical changes associated with the opening of pre-existing cracks, and/or to the development of diffuse damage at the tip of the crack. After giving a brief overview of the theoretical model to describe the decorrelation of diffuse waveforms induced by a local change, the article introduces the inversion procedure that produces the three dimensional maps of density of changes. These maps are interpreted in terms of mechanical changes, fracture opening, and damage development. In addition, each fracture is characterized by its effective scattering cross section.
Related Concept Videos
Microcracking in Concrete
Behavior of Concrete Under Compressive Load
As the concrete specimen fractures under...
Non-destructive Tests for Concrete Strength
Types of Non-structural Cracks in Concrete
Plastic shrinkage cracks typically form within hours after the concrete is poured. The concrete's surface dries faster than the bottom, creating tensile stress that the still-plastic concrete cannot withstand, leading to diagonal or randomly patterned cracks on the concrete surface.
Dynamic Modulus of Elasticity of Concrete
The sonic test is a common method to determine the dynamic modulus. In this test, a concrete beam, sized either 6 x 6 x 30 inches or 4 x 4 x 20 inches, is clamped at its center. Vibrations are initiated at one end of the beam by an electromagnetic exciter unit powered by a...
Tensile Strength Considerations of Concrete
The dimensions and shape of a concrete specimen...

