Related Experiment Video

Updated: Apr 3, 2026

Experimental Investigation of Secondary Flow Structures Downstream of a Model Type IV Stent Failure in a 180° Curved Artery Test Section
11:00

Experimental Investigation of Secondary Flow Structures Downstream of a Model Type IV Stent Failure in a 180° Curved Artery Test Section

Published on: July 19, 2016

12.0K

Statistical properties of a partially coherent cylindrical vector beam in oceanic turbulence

Yiming Dong, Lina Guo, Chunhao Liang

    Journal of the Optical Society of America. A, Optics, Image Science, and Vision
    |September 15, 2015
    PubMed

    More Related Videos

    Visually Based Characterization of the Incipient Particle Motion in Regular Substrates: From Laminar to Turbulent Conditions11:51

    Visually Based Characterization of the Incipient Particle Motion in Regular Substrates: From Laminar to Turbulent Conditions

    Published on: February 22, 2018

    9.2K
    Measurement of X-ray Beam Coherence along Multiple Directions Using 2-D Checkerboard Phase Grating10:39

    Measurement of X-ray Beam Coherence along Multiple Directions Using 2-D Checkerboard Phase Grating

    Published on: October 11, 2016

    10.2K

    Related Concept Videos

    Gauss's Law: Cylindrical Symmetry01:20

    Gauss's Law: Cylindrical Symmetry

    A charge distribution has cylindrical symmetry if the charge density depends only upon the distance from the axis of the cylinder and does not vary along the axis or with the direction about the axis. In other words, if a system varies if it is rotated around the axis or shifted along the axis, it does not have cylindrical symmetry. In real systems, we do not have infinite cylinders; however, if the cylindrical object is considerably longer than the radius from it that we are interested in,...
    10.1K
    Distribution of Stresses in a Narrow Rectangular Beam01:11

    Distribution of Stresses in a Narrow Rectangular Beam

    In studying beam stress distribution, examining an elemental section is essential. To determine the average shearing stress on this face, the calculated shear is divided by the surface area. Importantly, shearing stresses on the beam's transverse and horizontal planes mirror each other, indicating a consistent stress distribution along the upper region of the beam. Notably, shearing stresses are absent at the beam's upper and lower surfaces due to the absence of applied forces in these...
    677
    Steady, Laminar Flow in Circular Tubes01:23

    Steady, Laminar Flow in Circular Tubes

    Hagen-Poiseuille flow describes a viscous fluid's steady, incompressible flow through a cylindrical tube with a constant radius R. This flow profile is often applied to understand fluid transport in narrow channels, such as capillaries. It serves as a foundational example of laminar flow. In this model, cylindrical coordinates (r,θ,z) are used to describe the radial (r), angular (θ), and axial (z) dimensions within the tube. For Hagen-Poiseuille flow, the velocity profile is purely axial,...
    1.5K
    Divergence and Stokes' Theorems01:06

    Divergence and Stokes' Theorems

    The divergence and Stokes' theorems are a variation of Green's theorem in a higher dimension. They are also a generalization of the fundamental theorem of calculus. The divergence theorem and Stokes' theorem are in a way similar to each other; The divergence theorem relates to the dot product of a vector, while Stokes' theorem relates to the curl of a vector. Many applications in physics and engineering make use of the divergence and Stokes' theorems, enabling us to write...
    4.1K
    Beams with Symmetric Loadings01:15

    Beams with Symmetric Loadings

    The moment-area method is an analytical tool used in structural engineering to determine the slope and deflection of beams under various loads. Consider a cantilever with a concentrated load and moment at the free end. The first step is constructing a free-body diagram to calculate the reactions at the fixed end. Next, the bending moment diagram is plotted to visualize how the bending moment varies along the beam's length, focusing on points where the bending moment equals zero.
    The M/EI...
    495
    Elastic Curve from the Load Distribution01:16

    Elastic Curve from the Load Distribution

    The structural behavior of beams under distributed loads is critical for engineering analysis, which focuses on predicting how beams bend and react under such conditions. Different types of beams (e.g., cantilever, supported, or overhanging) behave differently under distributed load conditions.
    For all beams, the analysis of the beam's reaction to distributed loads begins by understanding the relationship between a beam's load and the resulting shear forces and bending moments. Initially, this...
    567