Preparation and Characterization of Polymeric Surfactants Based on Epoxidized Soybean Oil Grafted Hydroxyethyl
Xujuan Huang1, He Liu1, Shibin Shang1,2
1Institute of Chemical Industry of Forestry Products, Chinese Academy of Forestry , Key Laboratory of Biomass Energy and Material, National Engineering Laboratory for Biomass Chemical Utilization, Key and Laboratory on Forest Chemical Engineering, State Forestry Administration, Nanjing, Jiangsu Province 210042, China.
Abstract:
Epoxidized soybean oil (ESO) grafted hydroxyethyl cellulose (HEC) was prepared via ring-opening polymerization, in which the hydroxyl groups of HEC acted as initiators and the polymeric ESO were covalently bonded to the HEC. Hydrolysis of ESO-grafted HEC (ESO-HEC) was performed with sodium hydroxide, and the hydrolyzed ESO-HEC (H-ESO-HEC) products were characterized via Fourier transform infrared (FT-IR) and (1)H and (13)C nuclear magnetic resonance (NMR) spectroscopies, high-temperature gel permeation chromatography (HT-GPC), and differential scanning calorimetry (DSC). The results indicated that ring-opening polymerization of ESO occurred with the hydroxyl groups of HEC as initiators. The molecular weights of the H-ESO-HEC products were varied by adjusting the mass ratio of HEC and ESO. Through neutralizing the carboxylic acid of H-ESO-HEC with sodium hydroxide, novel polymeric surfactants (H-ESO-HEC-Na) were obtained, and the effects of polymeric surfactants on the surface tension of water were investigated as a function of concentration of H-ESO-HEC-Na. The H-ESO-HEC-Na was effective at lowering the surface tension of water to 26.33 mN/m, and the critical micelle concentration (CMC) value decreased from 1.053 to 0.157 g/L with increases in molecular weights of the polymeric surfactants. Rheological measurements indicated that the H-ESO-HEC-Na solutions changed from pseudoplastic property to Newtonian with increasing shear rate.
More Related Videos
Related Concept Videos
Preparation of Epoxides
Epoxides result from alkene oxidation, which can be achieved by a) air, b) peroxy acids, c) hypochlorous acids, and d) halohydrin cyclization.
Epoxidation with Peroxy Acids
Epoxidation of alkenes via oxidation with peroxy acids involves the conversion of a carbon–carbon double bond to an epoxide using the oxidizing agent meta-chloroperoxybenzoic acid, commonly known as MCPBA. Since the O–O bond of peroxy acids is very weak, the addition of electrophilic oxygen of peroxy acids to...
Esters to Carboxylic Acids: Saponification
The reaction requires a base in stoichiometric amounts, which participates in the reaction and is not regenerated later. So, the base acts as a...
Surface Active Agents


