[Arterial Plaques Identification Based on Intravascular Ultrasound Elasticity Imaging]

Intravascular ultrasound (IVUS) is widely used in coronary artery examination. Ultrasonic elastography combined with IVUS is very conspicuous in identifying plaque component and in detecting plaque vulnerability degree. In this study, a simulation model of the blood vessel based on finite element analysis (FEA) was established. The vessel walls generally have radial changes caused by different intravascular pressure. The signals at lower pressures were used as the pre-deformation data and the signals at higher pressure were used as the post-deformation data. Displacement distribution was constructed using the time-domain cross-correlation method, and then strain images. By comparison of elastograms under different pressures, we obtained the optimal pressure step. Furthermore, on the basis of the obtained optimize pressure step, the simulation results showed that this method could effectively distinguish characteristics between different component plaques, and could guide the later experiments and clinical applications.