Does Metal Transfer Differ on Retrieved Ceramic and CoCr Femoral Heads?

Metal transfer has been observed on retrieved THA femoral heads for both CoCr and ceramic bearing materials. In vitro wear testing has shown increased wear to polyethylene acetabular liners with the presence of metal transfer. This study sought to investigate the extent of metal transfer on the bearing surface of CoCr and ceramic femoral heads and identify prevalent morphologies. Three bearing couple cohorts: M-PE (n = 50), C-PE (n = 35), and C-C (n = 15), were derived from two previously matched collections (n = 50/group) of CoCr and ceramic femoral heads. From the three cohorts, 75% of the femoral heads showed visual evidence of metal transfer. These femoral heads were analyzed using direct measurement, digital photogrammetry, and white light interferometry. Surface area coverage and curved median surface area were similar among the three cohorts. The most prevalent metal transfer patterns observed were random stripes (n = 21/75), longitudinal stripes (n = 17/75), and random patches (n = 13/75). Metal transfer arc length was shorter in the M-PE cohort. Understanding the morphology of metal transfer may be useful for more realistic recreation of metal transfer in in vitro pin-on-disk and joint simulators studies.