Fast low-pressurized microwave-assisted extraction of benzotriazole, benzothiazole and benezenesulfonamide compounds...

Benzotriazoles (BTRs), benzothiazoles (BTs) and benzenesulfonamides (BSAs), compounds largely used in industrial and household applications, are ubiquitous emerging contaminants. In this work a novel, straightforward procedure for the simultaneous determination of two BTRs (1H-benzotriazole, 5-methyl-1H-benzotriazole), three BTs (benzothiazole, 2-hydroxybenzothiazole, 2-methylthiobenzothiazole) and two BSAs (benzenesulfonamide, toluenesulfonamide) in soil has been developed. The target analytes were extracted from soil by a single low-pressurized microwave-assisted extraction (MAE) cycle (120°C, 10min) and quantified by high-performance liquid chromatography with UV detection. For all the seven analytes, quantitative extraction yields (72-119%, n=4) were observed from recovery tests on soil samples (1g) spiked with 5, 10 and 50mg kg(-1), using 4mL water-methanol (85:15) as extracting solution. For the lower concentrations levels (100, 250 and 500μg kg(-1)), the analytes were extracted from soil samples (2-3g) using 6mL methanol, and the extract was pre-concentrated by evaporation before analysis; recoveries in the range 70-117% were obtained (n=4). Suitable intra-day and inter-day precision were observed, with values of relative standard deviation generally below 6% and 11% (n=4), respectively. Linearity was evaluated in the concentration range 0.5-10mg L(-1) by matrix-matched standards, obtaining r(2)>0.9996. The experimental method quantification limit (MQL) was 100μg kg(-1). The entire procedure has been successfully applied to the analysis of real impacted soil samples.