Related Experiment Video
Updated: Mar 29, 2026
Chemical Analysis of Water-accommodated Fractions of Crude Oil Spills Using TIMS-FT-ICR MS
Published on: March 3, 2017
Automated IR determination of petroleum products in water based on sequential injection analysis
Marina Falkova1, Christina Vakh1, Andrey Shishov1
1Department of Analytical Chemistry, St. Petersburg State University, RU-198504 Saint Petersburg, Russia.
Abstract:
The simple and easy performed automated method for the IR determination of petroleum products (PP) in water using extraction-chromatographic cartridges has been developed. The method assumes two stages: on-site extraction of PP during a sampling by using extraction-chromatographic cartridges and subsequent determination of the extracted PP using sequential injection analysis (SIA) with IR detection. The appropriate experimental conditions for extraction of the dissolved in water PP and for automated SIA procedure were investigated. The calibration plot constructed using the developed procedure was linear in the range of 3-200 μg L(-1). The limit of detection (LOD), calculated from a blank test based on 3σ was 1 µg L(-1). The sample volume was 1L. The system throughput was found to be 12 h(-1).
More Related Videos
08:37Measurement of H2S in Crude Oil and Crude Oil Headspace Using Multidimensional Gas Chromatography, Deans Switching and Sulfur-selective Detection
Published on: December 10, 2015
07:26A Simple Method for Automated Solid Phase Extraction of Water Samples for Immunological Analysis of Small Pollutants
Published on: January 1, 2016
Related Concept Videos
01:19Gas Chromatography: Types of Detectors-II
01:26Inductively Coupled Plasma Atomic Emission Spectroscopy: Instrumentation
There are three main types of inductively coupled plasma atomic emission spectroscopy (ICP-AES) instruments: sequential, simultaneous multichannel, and Fourier transform instruments, with the latter being less commonly used....