Related Experiment Video
Updated: Mar 28, 2026

Automated 90Sr Separation and Preconcentration in a Lab-on-Valve System at Ppq Level
Published on: June 6, 2018
Evaluation of procedures for (226)Ra determination in samples with high barium concentration by α-particle
1Jožef Stefan Institute, Jamova 39, SI-1000 Ljubljana, Slovenia.
Abstract:
The γ emitter (133)Ba is the most often used tracer in determination of (226)Ra by α-particle spectrometry. If the source for α-particle spectrometry is prepared by microcoprecipitation, a high Ba concentration causes a thicker source layer which results in reduced counting efficiency due to self-absorption on the α spectrometer and consequently lower result for (226)Ra, while not effecting the measurement of (133)Ba in γ-ray spectrometry. If the electrodeposition is used, recoveries of deposited Ra and Ba are not necessarily the same and impurities of other α emitters may interfere with the α spectrum.
More Related Videos
07:52A Novel Technique for Raman Analysis of Highly Radioactive Samples Using Any Standard Micro-Raman Spectrometer
Published on: April 12, 2017
12:02Determination of Thermodynamic Properties of Alkaline Earth-liquid Metal Alloys Using the Electromotive Force Technique
Published on: November 3, 2017
Related Concept Videos
Atomic Emission Spectroscopy: Lab
Atomic Absorption Spectroscopy: Lab
Solutions containing organic solvents, such as low-molecular-mass alcohols, esters, or ketones, enhance absorbances by increasing...
Qualitative Analysis
For instance, group IV...
Atomic Emission Spectroscopy: Overview
Atomic Absorption Spectroscopy: Radiation and Light Sources
Two common narrow-range 'line' sources used in AAS are hollow-cathode lamps (HCLs) and...
Upper GI Series: Barium Swallow
Purpose and Procedure
Patients undergoing this procedure ingest a liquid containing barium sulfate with a chalky...