Related Experiment Video
Updated: Mar 28, 2026

Low-cost Custom Fabrication and Mode-locked Operation of an All-normal-dispersion Femtosecond Fiber Laser for Multiphoton Microscopy
Published on: November 22, 2019
High-peak-power optically-pumped AlGaInAs eye-safe laser with a silicon wafer as an output coupler: comparison
Abstract:
An intrinsic silicon wafer is exploited as an output coupler to develop a high-peak-power optically-pumped AlGaInAs laser at 1.52 μm. The gain chip is sandwiched with the diamond heat spreader and the silicon wafer to a stack cavity. It is experimentally confirmed that not only the output stability but also the conversion efficiency are considerably enhanced in comparison with the separate cavity in which the silicon wafer is separated from other components. The average output power obtained with the stack cavity was 2.02 W under 11.5 W average pump power, corresponding to an overall optical-to-optical efficiency of 17.5%; the slope efficiency was 18.6%. The laser operated at 100 kHz repetition rate and the pulse peak power was 0.4 kW.

