Volatile organic compounds (VOCs) in surface coating materials: Their compositions and potential as an alternative
Trieu-Vuong Dinh1, In-Young Choi1, Youn-Suk Son2
1Department of Environmental Engineering, Konkuk University, 120 Neungdong-ro, Gwangjin-Gu, Seoul 143-701, South Korea.
Abstract:
A sampling system was designed to determine the composition ratios of VOCs emitted from 31 surface coating materials (SCMs). Representative architectural, automotive, and marine SCMs in Korea were investigated. Toluene, ethylbenzene, and xylene were the predominant VOCs. The VOC levels (wt%) from automotive SCMs were significantly higher than those from architectural and marine paints. It was found that target SCMs comprised mainly VOCs with 6-10 carbon atoms in molecules, which could be adsorbed by activated carbon. The saturated activated carbon which had already adsorbed toluene, ethylbenzene, and m-xylene was combusted. The saturated activated carbon was more combustible than new activated carbon because it comprised inflammable VOCs. Therefore, it could be an alternative fuel when using in a "fuelization system". To use the activated carbon as a fuel, a control technology of VOCs from a coating process was also designed and introduced.
Related Concept Videos
Biofuels
Aromatic Compounds: Overview
In 1825, Faraday isolated...
Combustion Energy: A Measure of Stability in Alkanes and Cycloalkanes
Alkanes undergo combustion in the presence of excess oxygen and high-temperature conditions to give carbon dioxide and water. A combustion reaction is the energy source in natural gas, liquified...
Microbial Bioremediation of Hydrocarbons
What is Organic Chemistry?
Organic Compounds


