The production of monodisperse explosive particles with piezo-electric inkjet printing technology

We have developed a method to produce discrete microparticles from compounds dissolved in nonpolar or polar solvents using drop-on-demand inkjet printer technology. A piezoelectric inkjet printhead located atop a drying tube produces precise droplets containing defined quantities of analyte. Droplets solidify into microparticles with known composition and size as they traverse down the drying tube. Because this is a drop-on-demand printing process, a known number of droplets are produced providing quantitative particle delivery to a variety of substrates. Particular emphasis is placed on the development and characterization of the drying tube in this work. The drying tube was modeled using computational fluid dynamics and experimentally evaluated using laser-based flow visualization techniques. A notable design feature of the drying tube is the ability to push heated air through the tube rather than the need to pull air from the exit. This provides the ability to place a known number of well-defined particles onto almost any substrate of interest, rather than having to collect particles onto a filter first and then transfer them to another surface. Several types of particles have been produced by this system, examples of which are pure particles of cyclotrimethylenetrinitramine ranging from 10 microm to 30 microm in diameter, and ammonium nitrate particles of 40 microm diameter. The final particle size is directly related to the solute concentration of the printing solution and the size of the initial jetted droplet.