[Sunrise gold foil jacket crown]

This technique permits the preparation of ceramic jacket crowns made on Sunrise laminated precious metal alloy. The Sunrise foil is gold-colored, made of 99% of precious metals and is 50 microns thick. The die is prepared in order to display a moderate and regular undercut beyond the cervical limit. The margin will be underlined with a red pencil. The Sunrise foil is cut according to predetermined templates. Then the foil is applied without burnishing, according to the technique of jacket crowns on platinum foil only by finger pressure. The double folding on closure is preferably done distally or mesially. Then, the metal base is disinserted, sandblasted with 100 microns aluminum oxide, replaced on its die, and placed in a rubber casing before being placed in the isostatic press, to be subjected to a pressure of 2,000 TSI (14 kg par cm2). Sunrise's orange color reinforces rather subtetly the overall color, making these reconstructions particularly esthetic. The color of the Sunrise metal does not require, therefore a too thick opaque. Any ceramic intended to be fired on a metal base, may be used in respecting its firing protocol. Sunrise, as any other technique of this type, require a careful preparation with a shoulder that has a rounded gingivoaxial line angle. Bridges may be built on the "thimbles" crowns, fitted on Sunrise cores, the pontics being made as a ceramo-metal framework.