Related Experiment Video

Updated: Mar 22, 2026

Design and Application of a Fault Detection Method Based on Adaptive Filters and Rotational Speed Estimation for an Electro-Hydrostatic Actuator
06:45

Design and Application of a Fault Detection Method Based on Adaptive Filters and Rotational Speed Estimation for an Electro-Hydrostatic Actuator

Published on: October 28, 2022

2.2K

[The Application of the Fault Tree Analysis Method in Medical Equipment Maintenance]

Hongbin Liu

    Zhongguo Yi Liao Qi Xie Za Zhi = Chinese Journal of Medical Instrumentation
    |April 13, 2016
    PubMed

    More Related Videos

    Author Spotlight: Simulation and Analysis of the Temperature Rise of Ring Main Unit Equipment04:35

    Author Spotlight: Simulation and Analysis of the Temperature Rise of Ring Main Unit Equipment

    Published on: July 5, 2024

    2.5K
    Design and Analysis for Fall Detection System Simplification08:05

    Design and Analysis for Fall Detection System Simplification

    Published on: April 6, 2020

    11.3K

    Related Concept Videos

    Fault Types01:18

    Fault Types

    When analyzing a single line-to-ground fault from phase A to ground at a three-phase bus, it is important to consider the fault impedance. This impedance is zero for a bolted fault, equal to the arc impedance for an arcing fault, and represents the total fault impedance for a transmission-line insulator flashover. To derive sequence and phase currents, fault conditions are translated from the phase domain to the sequence domain.
    For line-to-line faults occurring between phases B and C, the...
    482
    Node Analysis for AC Circuits01:14

    Node Analysis for AC Circuits

    Consider an angioplasty system featuring a catheter equipped with a turbine, a critical tool for removing plaque deposits from coronary arteries. This intricate medical device operates using a circuit model reminiscent of a dual-node RLC circuit powered by a current-controlled voltage source.
    To unravel the complexities of this system, nodal analysis is employed, a powerful technique founded on Kirchhoff's current law (KCL), which remains valid for phasors. AC circuits can effectively be...
    761
    Power System Three-Phase Short Circuits01:21

    Power System Three-Phase Short Circuits

    Determining the subtransient fault current in a power system involves representing transformers by their leakage reactances, transmission lines by their equivalent series reactances, and synchronous machines as constant voltage sources behind their subtransient reactances. In this analysis, certain elements are excluded, such as winding resistances, series resistances, shunt admittances, delta-Y phase shifts, armature resistance, saturation, saliency, non-rotating impedance loads, and small...
    623
    Bus Impedance Matrix01:24

    Bus Impedance Matrix

    Calculating subtransient fault currents for three-phase faults in an N-bus power system involves using the positive-sequence network. When a three-phase short circuit occurs at a specific bus, the analysis uses the superposition method to evaluate two separate circuits.
    In the first circuit, all machine voltage sources are short-circuited, leaving only the prefault voltage source at the fault location. The positive-sequence bus impedance matrix can be determined by solving the nodal equations,...
    564
    Distribution Reliability and Automation01:25

    Distribution Reliability and Automation

    Distribution reliability in electrical power systems is critical for ensuring an uninterrupted power supply to consumers at minimal cost. According to IEEE Standard Terms, reliability is the probability that a device will function without failure over a specified time period or amount of usage. For electric power distribution, this translates to maintaining continuous power supply and addressing customer concerns over power outages. Several indices, as defined by IEEE Standard 1366-2012, are...
    570
    Three-Phase Short Circuit—Unloaded Synchronous Machine01:21

    Three-Phase Short Circuit—Unloaded Synchronous Machine

    Conducting a three-phase short circuit test on an unloaded synchronous machine helps understand its impact on the system. The AC fault current's oscillogram, with the DC offset removed, reveals that the waveform amplitude decreases from an initially high value to a steady-state level for one phase of the machine.
    This behavior occurs due to the magnetic flux produced by the short-circuit armature currents. Initially, these currents follow high-reluctance paths but eventually shift to...
    799