Prediction of powdered activated carbon doses for 2-MIB removal in drinking water treatment using a simplified HSDM approach
Related Experiment Video
Updated: Mar 21, 2026

Measuring Carbon-based Contaminant Mineralization Using Combined CO2 Flux and Radiocarbon Analyses
Published on: October 21, 2016
Jianwei Yu1, Fong-Chen Yang2, Wei-Nung Hung3
1Key Laboratory of Drinking Water Science and Technology, Research Center for Eco-Environmental Sciences, Chinese Academy of Sciences, 18 Shuang-qing Road, Beijing 100085, China.
Abstract:
The addition of powdered activated carbon (PAC) is an effective measure to cope with seasonal taste and odor (T&O) problems caused by 2-methylisoborneol (2-MIB) and trans-1, 10-dimethyl-trans-9-decalol (geosmin) in drinking water. Some T&O problems are episodic in nature, and generally require rapid responses. This paper proposed a simplified approach for the application of the homogenous surface diffusion model (HSDM) to predict the appropriate PAC doses for the removal of 2-MIB. Equilibrium and kinetic experiments were performed for 2-MIB adsorption onto five PACs in three source waters. The simplified HSDM approach was compared with the experimental data, by assigning the Freundlich 1/n value in the range of 0.1-1.0 and obtaining the Freundlich equilibrium parameter K value through a 6-hr adsorption kinetic test. The model describes the kinetic adsorption data very well for all of the tested PACs in different source waters. The results were validated using the data obtained from one full scale water treatment plant, and the differences between the predicted and observed results were within 10% range. This simplified HSDM approach may be applied for the rapid determination of PAC doses for water treatment plants when faced with 2-MIB episodes in source waters.
More Related Videos
Related Concept Videos
Adsorption Isotherms II
Mechanistic Models: Compartment Models in Individual and Population Analysis
Two-Compartment Open Model: Extravascular Administration
The absorption exponent (ka) indicates the speed at which the drug...
Model Approaches for Pharmacokinetic Data: Distributed Parameter Models
The distributed parameter models are specifically designed to account for variations and differences in some drug classes. This model is particularly useful for assessing regional concentrations of anticancer or...
Compartment Models: Two-Compartment Model
Pharmacodynamic Models: Additive and Proportional Drug Effect Model

