Effect of gas-liquid flow pattern and microbial diversity analysis of a pilot-scale biotrickling filter for anoxic

Fernando Almenglo1, Tercia Bezerra2, Javier Lafuente2

  • 1Department of Chemical Engineering and Food Technologies, Faculty of Sciences, University of Cadiz, Campus de Excelencia Agroalimentario ceiA3, 11510, Puerto Real, Cádiz, Spain.

Chemosphere
|May 28, 2016
PubMed

Related Concept Videos

Bioreactor Controls-II01:18

Bioreactor Controls-II

In aerobic fermentations, oxygen is vital for microbial growth and metabolite production. Since air comprises only about 20% oxygen and the gas is poorly soluble in water—just 9 ppm at 20°C—supplying sufficient oxygen becomes a critical challenge, especially in high-demand processes like yeast growth or citric acid production. Even a fully saturated broth may offer only a few seconds of oxygen availability.To address this, sterile or scrubbed air is introduced into the...
2
Microbial Bioremediation of Hydrocarbons01:26

Microbial Bioremediation of Hydrocarbons

Bioremediation is an environmentally sustainable process that employs living organisms—primarily microorganisms—to degrade or neutralize pollutants from contaminated environments. In oil spills and hydrocarbon pollution, bioremediation involves the use of hydrocarbon-degrading bacteria to transform toxic compounds into less harmful substances. This approach leverages natural microbial metabolic processes and is considered both cost-effective and ecologically favorable compared to...
4
Environmental Applications of Microorganisms01:30

Environmental Applications of Microorganisms

Microorganisms play a pivotal role in maintaining ecosystem balance by recycling essential elements such as carbon, nitrogen, and phosphorus, as well as supporting processes like bioremediation, wastewater treatment, and biofuel production.Microbes in Elemental CyclesIn the carbon cycle, microorganisms decompose organic matter, releasing carbon dioxide via aerobic respiration. This carbon dioxide is subsequently used by photosynthetic organisms to synthesize organic compounds, closing the...
1.4K
Bioreactor Design and Operational System01:29

Bioreactor Design and Operational System

Bioreactors are engineered vessels designed to cultivate microorganisms under controlled conditions for industrial bioprocessing. They maintain sterility and allow precise regulation of pH, temperature, oxygen, and nutrient levels to optimize microbial growth and metabolite production. Bioreactors range from small laboratory units of 1 liter to industrial systems holding up to 500,000 liters, though only about 75% of their volume is actively used for fermentation. The remaining headspace...
2
Microbial Mats01:25

Microbial Mats

Microbial communities forming biofilms and mats represent complex, spatially structured ecosystems where metabolic processes are stratified according to light, oxygen, and nutrient gradients. Biofilms are initial colonization stages, only a few millimeters thick, while mature microbial mats can reach centimeter-scale thickness and display intricate vertical organization. Their structural and functional heterogeneity allows microorganisms to occupy distinct ecological niches within a few...
6
Scale-Up Processes01:14

Scale-Up Processes

The scale-up of microbial fermentation processes is essential in industrial biotechnology, allowing the transition from laboratory-scale experiments to commercial-scale production while aiming to maintain product yield and quality. This process requires meticulous adjustment of equipment design, process parameters, and contamination control strategies to accommodate increasing culture volumes.At the laboratory scale, cultures are typically maintained in 1 to 10-liter glass or autoclavable...
5