Evaluation of the successive approximations method for acoustic streaming numerical simulations

S O Catarino1, G Minas1, J M Miranda2

  • 1Center for Microelectromechanical Systems (CMEMS-UMinho), University of Minho, Campus de Azurém, 4800-058 Guimarães, Portugal.

Related Concept Videos

Linear Approximation in Frequency Domain01:26

Linear Approximation in Frequency Domain

Linear systems are characterized by two main properties: superposition and homogeneity. Superposition allows the response to multiple inputs to be the sum of the responses to each individual input. Homogeneity ensures that scaling an input by a scalar results in the response being scaled by the same scalar.
In contrast, nonlinear systems do not inherently possess these properties. However, for small deviations around an operating point, a nonlinear system can often be approximated as linear....
422
Linear Approximation in Time Domain01:21

Linear Approximation in Time Domain

Nonlinear systems often require sophisticated approaches for accurate modeling and analysis, with state-space representation being particularly effective. This method is especially useful for systems where variables and parameters vary with time or operating conditions, such as in a simple pendulum or a translational mechanical system with nonlinear springs.
For a simple pendulum with a mass evenly distributed along its length and the center of mass located at half the pendulum's length,...
394
Convergence of Fourier Series01:21

Convergence of Fourier Series

The Fourier series is a powerful mathematical tool for representing periodic signals as an infinite sum of complex exponentials. In practice, this infinite series is truncated to a finite number of terms, yielding a partial sum. This truncation makes the approximation of the signal feasible but introduces certain challenges, particularly near discontinuities, known as the Gibbs phenomenon.
The Gibbs phenomenon refers to the persistent oscillations and overshoots that occur near discontinuities...
511
Sampling Methods: Overview01:06

Sampling Methods: Overview

A sample refers to a smaller subset representative of a larger population. In analytical chemistry, studying or analyzing an entire population is often impractical or impossible. Therefore, samples are used to draw inferences and generalize the whole population. The sampling method selects individuals or items from a population to create a sample. Standard sampling methods include random, judgemental, systematic, stratified, and cluster sampling. 
In analytical chemistry, the choice of...
3.8K
Upsampling01:22

Upsampling

Managing signal sampling rates is essential in digital signal processing to maintain signal integrity. A decimated signal, characterized by a reduced frequency range due to its lower sampling rate, can be upsampled by inserting zeros between each sample. This upsampling process expands the original spectrum and introduces repeated spectral replicas at intervals dictated by the new Nyquist frequency. To refine this zero-inserted sequence, it is passed through a lowpass filter with a cutoff...
688
Reconstruction of Signal using Interpolation01:10

Reconstruction of Signal using Interpolation

Signal processing techniques are essential for accurately converting continuous signals to digital formats and vice versa. When a continuous signal is sampled with a period T, the resulting sampled signal exhibits replicas of the original spectrum in the frequency domain, spaced at intervals equal to the sampling frequency. To handle this sampled signal, a zero-order hold method can be applied, which creates a piecewise constant signal by retaining each sample's value until the next...
822