Design of single-phase driven screw-thread-type ultrasonic motor

Most screw-thread-type ultrasonic motors are designed to be two-phase driven. This paper aims to present a novel single phase driven design that generates the required wobble motion, thus significantly simplifying the driving circuit of the ultrasonic motor. The proposed single-phase driven screw-thread-type ultrasonic motor works with two orthogonal bending modes generated by an asymmetric stator design. The novel stator design can improve the vibration displacement and further enhance the performance of the single phase driven motor. The vibration characteristics of the asymmetric stator structure were analyzed by ANSYS finite element analysis software. Based on the design and analysis processes, a prototype of the desired screw-thread-type ultrasonic motor was fabricated and tested. When the operating voltage is 200 Vpp, the obtained main characteristics of the proposed motor are as follows: the working frequency is between 28.3 and 29.5 kHz; the maximum no-load velocity is approximately 4.1 mm s(-1); and the thrust force is 1.6 N.