Related Experiment Video
Updated: Mar 19, 2026

Fabrication of Low Temperature Carbon Nanotube Vertical Interconnects Compatible with Semiconductor Technology
Published on: December 7, 2015
Evaluation of interface trap densities and quantum capacitance in carbon nanotube network thin-film transistors
1School of Electrical Engineering, Kookmin University, 77 Jeongneung-ro, Seongbuk-gu, Seoul 02707, Korea.
Abstract:
The interface trap density in single-walled carbon nanotube (SWNT) network thin-film transistors (TFTs) is a fundamental and important parameter for assessing the electronic performance of TFTs. However, the number of studies on the extraction of interface trap densities, particularly in SWNT TFTs, has been insufficient. In this work, we propose an efficient technique for extracting the energy-dependent interface traps in SWNT TFTs. From the measured dispersive, frequency-dependent capacitance-voltage (C-V) characteristics, the dispersive-free, frequency-independent C-V curve was obtained, thus enabling the extraction and analysis of the interface trap density, which was found to be approximately 8.2 × 10(11) eV(-1) cm(-2) at the valence band edge. The frequency-independent C-V curve also allows further extraction of the quantum capacitance in the SWNT network without introducing any additional fitting process or parameters. We found that the extracted value of the quantum capacitance in SWNT networks is lower than the theoretical value in aligned SWNTs due to the cross point of SWNTs on the SWNT network. Therefore, the method proposed in this work indicates that the C-V measurement is a powerful tool for obtaining deep physical insights regarding the electrical performance of SWNT TFTs.
Related Concept Videos
MOS Capacitor
The metal gate is typically made from highly conductive materials such as aluminum or polysilicon. Beneath the metal gate lies a thin layer of...
Equivalent Capacitance
Equivalent Capacitance
The following strategies are adopted to calculate...
Characteristics of MOSFET
Various vital parameters influence their functionality, which is crucial for theory and electronics applications. First, channel dimensions, precisely length, and width, are pivotal. The size of these channels affects the transistor's ability to carry current and switching speeds; shorter channels typically enable...
Metal-Semiconductor Junctions
Schottky Barriers
Schottky barriers arise when a metal with a work function (Φm) contacts a semiconductor with a different work function (Φs). Initially, electrons transfer until the Fermi levels of the metal and semiconductor align at equilibrium. For instance, if Φm > Φs, the semiconductor Fermi level is higher than the metal's before contact. The...

