Related Experiment Video
Updated: Mar 18, 2026

Characterizing Dissipative Elastic Metamaterials Produced by Additive Manufacturing
Published on: June 28, 2024
Self-vibration cancellation of a novel bi-directional magnetized NdFeB/magnetostrictive/piezoelectric laminate
Chung Ming Leung1, Feifei Wang2, Ya Wang1
1Department of Mechanical Engineering, Stony Brook University, Stony Brook, New York 11794, USA.
Abstract:
A novel magnetoelectric (ME) laminated composite structure is proposed in this work, aiming to provide a good self-vibration cancellation performance under the magnetic field detection environment. The proposed structure consists of two Terfenol-D magnetostrictive alloy plates which are revised and length-magnetized by two NdFeB magnets bonded on the top surface of a thickness-polarized Pb(Zr, Ti)O3 (PZT) ceramic plate with separate electrodes. Experiments have shown that great vibration suppression up to 44 dB under harmonic disturbance was observed. The ME coefficient of the proposed structure also reaches up to ∼29 mV/Oe at non-resonance frequency and 758 mV/Oe at resonance frequency of 79 kHz which is ∼2 times larger than the traditional L-T Terfenol-D/PZT bilayer configuration of the same scale. Such performance improvement is achieved based on the bi-directional magnetic field bias (HBias) of two NdFeB magnets in magnetostrictive layer, internal in-series electrical wire connection in piezoelectric layer. The proposed design has great potential to be used for industrial applications associated with heavy environmental vibration noise.
Related Concept Videos
Magnetic Damping
If, however, the bob is a slotted metal plate, the magnet produces a much smaller effect. When a slotted metal plate enters the field, an emf is induced by the change in flux; however, it is less effective because the slots limit the...
Lenz's Law
If a bar magnet is moved toward a coil such that the magnetic flux...
Magnetostatic Boundary Conditions
Motional Emf
Potential Due to a Magnetized Object
The vector...
Magnetic Field Due To A Thin Straight Wire

