Related Experiment Video
Updated: Mar 17, 2026

Interactive and Visualized Online Experimentation System for Engineering Education and Research
Published on: November 24, 2021
Tuning of linear ADRC with known plant information
1School of Control & Computer Engineering, North China Electric Power University, Beijing 102206, China.
Abstract:
Linear active disturbance rejection control (ADRC) is known for its simplicity and its performance in disturbance attenuation. Currently, tuning of linear ADRC (LADRC) is via the bandwidth idea. In this paper, tuning of LADRC with known plant information is investigated. It is shown that there are limitations using only two bandwidths to tune the LADRC controllers. To take advantage of the known plant information, a generalized ADRC (GADRC) method is proposed. Then the intrinsic link between the conventional LADRC and GADRC is analyzed. It is shown that the available plant model information used in GADRC can be utilized in the designs of the observer gain and the controller gain of the conventional LADRC. Simulation results demonstrate that with known plant information incorporated, the performance of a conventional LADRC can indeed be improved, especially for unstable, time-delayed and non-minimum phase processes.
More Related Videos
06:45Design and Application of a Fault Detection Method Based on Adaptive Filters and Rotational Speed Estimation for an Electro-Hydrostatic Actuator
Published on: October 28, 2022
09:01Gain-compensation Methodology for a Sinusoidal Scan of a Galvanometer Mirror in Proportional-Integral-Differential Control Using Pre-emphasis Techniques
Published on: April 4, 2017
Related Concept Videos
Time and frequency -Domain Interpretation of PI Control
Acting as a low-pass filter, the PI controller slows the system's response and extends settling times. This requires...
Control Systems
At the heart...
Feedback control systems
Linear feedback systems are theoretical models that simplify analysis and design. These systems operate under the principle that their output is directly proportional to their input within certain ranges. For instance, an amplifier in a control system behaves linearly as long as the input signal remains within a specific range. However, most physical systems exhibit inherent nonlinearity...
PD Controller: Design
Designing a continuous-data controller requires selecting and linking components like adders and integrators, which are fundamental in Proportional,...
Linear Approximation in Frequency Domain
In contrast, nonlinear systems do not inherently possess these properties. However, for small deviations around an operating point, a nonlinear system can often be approximated as linear....
Phase-lead and Phase-lag Controllers