Related Experiment Video
Updated: Mar 16, 2026

Effect of Bending on the Electrical Characteristics of Flexible Organic Single Crystal-based Field-effect Transistors
Published on: November 7, 2016
Analysis of Stress Effect on (110)-Oriented Single-Gate SOI nMOSFETs Using a Silicon-Thickness-Dependent Deformation
Abstract:
The stress effect in uniaxially strained (100)- and (110)-oriented single-gate (SG) silicon-on-insulator (SOI) n-type metal-oxide-semiconductor field-effect transistors (MOSFETs) was analyzed. A model of a silicon-thickness-dependent deformation potential (D(as_T(si))) was used for accurate calculation of mobility using a Schrödinger-Poisson solver. The simulation results obtained using the D(ac_T(si)) model exhibited excellent agreement with the measured mobility for both strained and unstrained conditions. The enhancements in electron mobility under conditions of longitudinal tensile strain were analyzed as a function of the silicon thickness and strain. As the silicon thickness decreased, the mobility enhancement in (100) SG MOSFETs reached a peak, whereas it diminished in (110) SG MOSFETs. As the strain increased, mobility enhancement increased in the (110) case, whereas it saturated in the (100) case. Therefore, larger mobility enhancement in the (110) orientation is expected. These differences in enhancement between the (100) and (110) cases resulted from differences in the quantization mass, which affect the energy difference between the 1st subbands of two-fold and four-fold degenerate valleys, as well as occupancy change.
More Related Videos
Related Concept Videos
Characteristics of MOSFET
Various vital parameters influence their functionality, which is crucial for theory and electronics applications. First, channel dimensions, precisely length, and width, are pivotal. The size of these channels affects the transistor's ability to carry current and switching speeds; shorter channels typically enable...
MOSFET: Depletion Mode
The primary characteristic of depletion-mode MOSFETs is their ability to conduct current between the drain and source terminals without gate bias. This inherent conductivity...
MOSFET
In an n-MOSFET, the structure includes n-type source and drain...
Small-Signal Analysis of MOSFET Amplifiers
MOSFET: Enhancement Mode
In their basic form, enhancement-mode MOSFETs are typically non-conductive when the gate-source voltage (Vgs) is zero. This default 'off' state means no...
MOS Capacitor
The metal gate is typically made from highly conductive materials such as aluminum or polysilicon. Beneath the metal gate lies a thin layer of...

