Risk assessment and technical feasibility of usage of paper mill sludge biochar-based exhausted adsorbent for...

Risk assessment and technical feasibility of brick formation from exhausted paper mill sludge derived biochar obtained after its use as an adsorbent for the treatment of effluent containing pentachlorophenol was studied. The bricks were prepared by geopolymerization mechanism in presence of sodium hydroxide, and the extent of geopolymerization was determined on the basis of crystal structure, surface functionalities, and surface morphology of the bricks. The preparation parameters (sodium hydroxide dosage, initial water and calcium carbonate content and curing temperature) were optimized and the results were analyzed in terms of compressive strength, water absorption, and abrasion index. Risk assessment of heavy metals was performed to determine the contamination level and overall hazard index of the biochar-based geopolymer bricks. Hazard quotient and hazard index were calculated to assess the overall non-carcinogenic risk posed by selected heavy metals via ingestion and dermal contact. The leaching potential of heavy metal and pentachlorophenol from the biochar-based geopolymer bricks was also determined. The results showed that the biochar-based geopolymer bricks showed good mechanical properties and the concentration of heavy metals in the leachate falls within the permissible limits prescribed by Indian Standards for Industrial and Sewage Effluents Discharge (inland surface water).