Dual-Band Dual-Mode Substrate Integrated Waveguide Filters with Independently Reconfigurable TE101 Resonant Mode

A novel perturbation approach using additional metalized via-holes for implementation of the dual-band or wide-band dual-mode substrate integrated waveguide (SIW) filters is proposed in this paper. The independent perturbation on the first resonant mode TE101 can be constructed by applying the proposed perturbation approach, whereas the second resonant mode TE102 is not affected. Thus, new kinds of dual-band or wide-band dual-mode SIW filters with a fixed or an independently reconfigurable low-frequency band have been directly achieved. In order to experimentally verify the proposed design method, four two-cavity dual-band SIW filters, which have different numbers of perturbation via-holes in each cavity, and a two-cavity dual-band SIW filter, which includes four via-holes and eight reconfigurable states in each cavity, are designed and experimentally assessed. The measured results indicate that the available frequency-ratio range from 1 to 1.3 can be realized by using four two-cavity dual-band SIW filters. The center frequency of the first band can be tuned from 4.61 GHz to 5.24 GHz, whereas the center frequency of the second one is fixed at around 6.18 GHz for the two-cavity dual-band SIW filter with four reconfigurable states via-holes. All the simulated and measured results show an acceptable agreement with the predicted data.