Related Experiment Video
Updated: Mar 11, 2026

Vegetated Treatment Systems for Removing Contaminants Associated with Surface Water Toxicity in Agriculture and Urban Runoff
Published on: May 15, 2017
Evaluation of permeable pavement responses to urban surface runoff
Meysam Kamali1, Madjid Delkash2, Massoud Tajrishy1
1Department of Civil and Environmental Engineering, Sharif University of Technology, Tehran, Iran.
Abstract:
The construction of permeable pavement (PP) in sidewalks of urban areas is an alternative low impact development (LID) to control stormwater runoff volume and consequently decrease the discharge of pollutants in receiving water bodies. In this paper, some laboratory experiments were performed to evaluate the efficiency of a PP subjected to sediment loadings during its life span. Simple infiltration models were validated by the laboratory experiments to evaluate the trend and extend of PP infiltration capacity throughout the life of the pavement operation. In addition, performances of the PP in removing total suspended solids (TSS) and selective nutrient pollutants such as NO3-,NH4+ and PO4-3 from the surface runoff have been investigated. Experimental data showed that the PP was completely clogged after seven hydrological years. The model revealed that the ratio of horizontal to vertical hydraulic conductivity is 3.5 for this PP. Moreover, it was found that 20% reduction in hydraulic conductivity occurred after three hydrological years. The PP showed 100%, 23% and 59% efficiencies in sediment retention (TSS removal), (PO4-3), and N-NH4+ removal during the entire study, respectively. However, the removal efficiency of (N-NO3-) was -12% and we suspect the increase in effluent (N-NO3-) is due to the nitrification process in subsurface layers. This study demonstrated that when PPs are annually cleaned, it is expected that PPs can function hydraulically and be able to remove particulate pollutants during their life span by a proper maintenance.
Related Concept Videos
Masonry Paving
Porosity and Absorption of Aggregate
When all pores in an aggregate are filled with water, the aggregate is considered saturated and surface-dry. If left in dry air, water will evaporate until the...
Design Example: Analyzing Capacity Contours for Flood Risk Assessment
Pore Size Distribution
Adequate...
Abrasion Resistance of Concrete
One such test is the revolving disc test, where three plates...
Conservation of Mass in Moving, Nondeforming Control Volume
In the context of a detention basin, the conservation of mass states that the total mass of water entering the basin must equal the mass leaving the basin plus any accumulation of...

