Related Experiment Video
Updated: Mar 11, 2026

Generation and Coherent Control of Pulsed Quantum Frequency Combs
Published on: June 8, 2018
Stability of a frequency-comb-based transfer-lock using a passive Fabry-Perot resonator
Abstract:
We report on a transfer-lock laser frequency stabilization that utilizes a frequency comb (FC) and a radio frequency counter referenced to a GPS frequency standard to compensate for the frequency drifts of two lasers, which are locked to a single passive Fabry-Perot resonator (FPR). The method requires only one optical phase lock with the FC and allows transfer locking of lasers at wavelengths beyond the usable range of the FC. To attain a large frequency tuning range for the lasers, we implement optical serrodyning. We further demonstrate an efficient scheme to suppress residual amplitude modulation, thereby improving the stability of the Pound-Drever-Hall lock used in this case. The absolute frequency stability was found to be better than 2×10-13 on timescales up to 300 s. Hence, together with the frequency stability on short timescales provided by the FPR, this scheme facilitates coherent Raman spectroscopy as needed for an example for the production of ultracold dipolar heteronuclear molecules.
Related Concept Videos
Design Example: Underdamped Parallel RLC Circuit
Starting with a fixed...
Parallel Resonance
Oscillations In An LC Circuit
Passive Filters
Low-Pass Filters
Low-pass filters are designed to transmit signals with frequencies lower than the cutoff frequency, ωc, and attenuate those above it. The cutoff...
RLC Circuit as a Damped Oscillator
Consider a series RLC circuit. Here, the presence of resistance in the circuit leads to energy loss due to joule heating in the resistance. Therefore, the total electromagnetic energy in the circuit is no longer constant and decreases with time. Since the magnitude of charge, current, and potential difference continuously decreases, their oscillations are said to be damped. This is...
Resonance in an AC Circuit

