[Effect of inserted angle on the stability of loaded microscrews]

Objective: To evaluate the effect of different insertion angles on the osseointegration of loaded microscrews in beagle jaws. Methods: Forty-eight microscrews were inserted at four different angles (30°, 50°, 70° and 90°) into the interradicular zones between the mandibular first molar and third premolar in twelve beagles and the microscrews had been loaded with a force of 2 N immediately for 8 weeks. After microscrew-bone specimens fixed, the maximum output value (F_max) of pull-out test was recorded and the histomorphological changes of hard tissue were observed. The bone-implant contact (BIC%) was quantitatively analyzed and the osseointegration of microscrew-bone interface was comprehensively evaluated. Results: Both F_max and BIC% values of microscrews were influenced by the insertion angles. The maximum value of F_max was (385±23) N in the group with 50° angle, and the minimum value was (198±16) N in the group with 30° angle(P <0.05). The maximum value of BIC% was (59.1±6.0)% in the group with 70° angle, and the minimum value was (30.2±3.2)% in the group with 30° angle (P <0.05). Histomorphology observation revealed that in peri-screws region, the various degree of bone remodeling was found in different angle samples. Conclusions: The insertion angles (50°and 70°) were favorable to the stability of the microscrew.