Related Experiment Video
Updated: Mar 7, 2026

In Situ Transmission Electron Microscopy with Biasing and Fabrication of Asymmetric Crossbars Based on Mixed-Phased a-VOx
Published on: May 13, 2020
Solution-processable poly(N-vinylcarbazole)-covalently grafted MoS2 nanosheets for nonvolatile rewritable memory
Fei Fan1, Bin Zhang1, Yaming Cao1
1Key Laboratory for Advanced Materials, Institute of Applied Chemistry, East China University of Science and Technology, 130 Meilong Road, Shanghai 200237, China. chentangyu@yahoo.com.
Abstract:
A novel nonvolatile rewritable memory device based on the soluble poly(N-vinylcarbazole)-chemically modified MoS2 nanosheets (MoS2-PVK) was fabricated with the configuration of Au/MoS2-PVK/ITO. This is the first example of polymer covalently modified MoS2 nanosheet-based memory devices. As expected, this device exhibited a typical storage performance of nonvolatile rewritable memory, with a turn-on voltage of -1.54 V and an ON/OFF current ratio of 4 × 102. After annealing at 80 °C for 1 h under a nitrogen atmosphere, a high ON/OFF current ratio (up to 3 × 104) and a lower turn-on voltage (-1.31 V), which are among the best reported for MoS2-based polymer/organic memory devices, were achieved due to enhanced crystallization of PVK, which induced a more efficient intramolecular charge transfer effect between PVK and MoS2 during the annealing process. The effect of film thickness on the current-voltage characteristics of the MoS2-PVK-based devices and the memory performance of the MoS2/PVK blends-based devices have also been explored.
More Related Videos
Related Concept Videos
MOS Capacitor
The metal gate is typically made from highly conductive materials such as aluminum or polysilicon. Beneath the metal gate lies a thin layer of...
MOSFET: Enhancement Mode
In their basic form, enhancement-mode MOSFETs are typically non-conductive when the gate-source voltage (Vgs) is zero. This default 'off' state means no...
MOSFET
In an n-MOSFET, the structure includes n-type source and drain...
MOSFET: Depletion Mode
The primary characteristic of depletion-mode MOSFETs is their ability to conduct current between the drain and source terminals without gate bias. This inherent conductivity...

