Integrating pretreatment and denitrification in constructed wetland systems

The aim of this work was to study the operational characteristics and the efficiency of a compact constructed wetland system for municipal wastewater treatment that integrates denitrification in the pre-treatment unit. The proposed system was simulated by two units in series with effluent recirculation, the first one being an anoxic digester, conceived as a hydrolytic up flow sludge bed for solids hydrolysis and denitrification, and the second one a sand column that simulated the operation of a vertical flow constructed wetland. The hybrid system consisted of two small columns of 4 and 10.2cm in diameter (anoxic digester and vertical flow unit, respectively). The unplanted system was operated successively with synthetic and real municipal wastewater over a period of 136days. Hydraulic loading rate ranged from 212 to 318mm/day and surface loading rate from 122 to 145g/m²·day of chemical oxygen demand and 10-15g/m²·day of total nitrogen for the overall system. The overall system reached removals of 91% to 99% for total suspended solids, chemical oxygen demand and biochemical oxygen demand whilst total nitrogen removal ranged from 43% to 61%. In addition to suspended solids removal (up to 78%), the anoxic digester provided high denitrification rates (3-12gN/m²·day) whilst the vertical flow unit provided high nitrification rates (8-15gN/m²·day). Organic matter was mainly removed in the anoxic digester (63-82% chemical oxygen demand) and used for denitrification. Final effluent concentration was lower for ammonia (7.4±2.4mgN/L on average) than for nitrate (19.8±4.4mgN/L), denitrification appearing as the limiting step in nitrogen removal in the system. CH₄ or N₂O emissions were not detected in any of the units of the system indicating very low greenhouse gas emissions.