Related Experiment Video
Updated: Jul 12, 2026

Ohmic Contact Fabrication Using a Focused-ion Beam Technique and Electrical Characterization for Layer Semiconductor Nanostructures
Published on: December 5, 2015
Accurate extraction of WSe2 FETs parameters by using pulsed I-V method at various temperatures
Sung Tae Lee1, In Tak Cho1, Won Mook Kang1
1Department of Electrical and Computer Engineering, Seoul National University, Seoul, 151-747 South Korea.
Abstract:
This work investigates the intrinsic characteristics of multilayer WSe2 field effect transistors (FETs) by analysing Pulsed I-V (PIV) and DC characteristics measured at various temperatures. In DC measurement, unwanted charge trapping due to the gate bias stress results in I-V curves different from the intrinsic characteristic. However, PIV reduces the effect of gate bias stress so that intrinsic characteristic of WSe2 FETs is obtained. The parameters such as hysteresis, field effect mobility (μeff), subthreshold slope (SS), and threshold voltage (Vth) measured by PIV are significantly different from those obtained by DC measurement. In PIV results, the hysteresis is considerably reduced compared with DC measurement, because the charge trapping effect is significantly reduced. With increasing temperature, the field effect mobility (μeff) and subthreshold swing (SS) are deteriorated, and threshold voltage (Vth) decreases.

