Near-field investigation of the explosive dispersal of radioactive material based on a reconstructed spherical...

A "dirty bomb" is a type of radiological dispersal device (RDD) that has been the subject of significant safety and security concerns given the disruption that would result from a postulated terrorist attack. Assessing the risks of radioactive dose in a hypothetical scenario requires models that can accurately predict dispersion in a realistic environment. Modelling a RDD is complicated by the fact that the most important phenomena occur over vastly disparate spatial and temporal length scales. Particulate dispersion in the air is generally considered on scales of hundreds to thousands of meters, and over periods of minutes and hours. Dispersion models are extremely sensitive, however, to the particle size and source characterization, which are determined in distances measured in micrometers to meters, over milliseconds or less. This study examines the extent to which the explosive blast determines the transport of contaminant particles relative to the atmospheric wind over distances relevant to "near-field" dispersion problems (i.e., hundreds of meters), which are relevant to urban environments. Our results indicate that whether or not the effect of the blast should be included in a near-field dispersion model is largely dependent on the size of the contaminant particle. Relatively large particles (i.e., >40 μm in diameter), which are most likely to be produced by a RDD, penetrate the leading shock front, thereby avoiding the reverse blast wind. Consequently, they travel much farther than suspended aerosols (<10 μm) before approaching the ambient wind velocity. This suggests that, for these "near-field" dispersion problems in urban environments, the transport of contaminants from the blast wave may be integral to accurately predicting their dispersion.