Optimization and continuous fabrication of moth-eye nanostructure array on flexible polyethylene terephthalate...

Reflection loss can cause harmful effects on the performance of optoelectronic devices, such as cell phones, notebooks, displays, solar cells, and light-emitting diode (LED) devices. In order to obtain broadband antireflection (AR) properties, many researchers have utilized surface texture techniques to produce AR subwavelength structures on the interfaces. Among the AR subwavelength structures, the moth-eye nanostructure is one of the most promising structures, with the potential for commercialization in the near future. In this research, to obtain broadband AR performance, the optimization of moth-eye nanostructures was first carried out using the finite difference time domain method within the spectral ranges of 400-800 nm, including the optimization of shape, height, pitch, and residual layer thickness. In addition, the continuous production of moth-eye nanostructure array upon a flexible polyethylene terephthalate substrate was demonstrated by using the roll-to-roll ultraviolet nanoimprint lithography (R2R UV-NIL) process and anodic aluminum oxide mold, which provided a solution for the cost-effective fabrication of moth-eye nanostructure array. The AR performance of moth-eye nanostructure array obtained by the R2R UV-NIL process was also investigated experimentally, and good consistence was shown with the simulated results. This research can provide a beneficial direction for the optimization and cost-effective production of the moth-eye nanostructure array.