Related Experiment Video
Updated: Mar 2, 2026

Solid-state Graft Copolymer Electrolytes for Lithium Battery Applications
Published on: August 12, 2013
Electrolyte Volume Effects on Electrochemical Performance and Solid Electrolyte Interphase in Si-Graphite/NMC
Seong Jin An1,2, Jianlin Li1,2, Claus Daniel1,2
1Energy & Transportation Science Division, Oak Ridge National Laboratory , One Bethel Valley Road, P. O. Box 2008, Oak Ridge, Tennessee 37831, United States.
Abstract:
This study aims to explore the correlations between electrolyte volume, electrochemical performance, and properties of the solid electrolyte interphase in pouch cells with Si-graphite composite anodes. The electrolyte is 1.2 M LiPF6 in ethylene carbonate:ethylmethyl carbonate with 10 wt % fluoroethylene carbonate. Single layer pouch cells (100 mA h) were constructed with 15 wt % Si-graphite/LiNi0.5Mn0.3CO0.2O2 electrodes. It is found that a minimum electrolyte volume factor of 3.1 times to the total pore volume of cell components (cathode, anode, and separator) is needed for better cycling stability. Less electrolyte causes increases in ohmic and charge transfer resistances. Lithium dendrites are observed when the electrolyte volume factor is low. The resistances from the anodes become significant as the cells are discharged. Solid electrolyte interphase thickness grows as the electrolyte volume factor increases and is nonuniform after cycling.
More Related Videos
Related Concept Videos
The Electrical Double Layer
Theory of Strong Electrolytes
Ionic Strength: Effects on Chemical Equilibria
In this solution, the primary...
Electrochemical Systems
Electrogravimetric Analysis: Overview
To test the completeness of the...
Debye–Huckel–Onsager Conductance Equation

