Application of weak ultrasonic treatment on sludge electro-osmosis dewatering

Ultrasonic treatment is a good method of facilitating sewage sludge dewatering characteristics. It can also promote the potential of sludge electro-osmosis dewatering (EDW), which is an accepted method of deep dewatering, but the treatment method and optimizing conditions should be determined by performing experiments. In this study, we consider two treating methods: ultrasonic pre-treatment, which uses ultrasonic treatment as sludge pre-treatment before electro-osmosis dehydration, and ultrasonic coupling, which uses ultrasonic and electric fields simultaneously. Using sludge from the Tianjin Jizhuangzi sewage treatment plant, we analyze the influence of ultrasonic intensity and treatment time on sludge dewatering by performing two different methods. The results show that they effectively facilitated sludge EDW. Under the same conditions, i.e. 2 cm cake initial thickness, voltage of 60 V for 5 min, and 0.1 MPa mechanical pressure for 5.5 min, the optimum processing conditions for ultrasonic pre-treatment were found to be 0.510 W/cm² and 3.5 min, the dehydration rate reached 34.71%, and the optimum conditions for ultrasonic coupling were 0.255 W/cm² and 3.5 min, while the dehydration rate reached 40.78%. The dehydration rates for both approaches were clearly better than 17.40%, which was obtained under pure electro-osmosis dehydration. To compare the effects of ultrasonic pre-treatment and ultrasonic coupling on the electro-osmosis dehydration process, in this paper, we present the curves of dehydration rate, electric current, electro-osmosis flow, and scanning electron microscopy for dewatered sludge. Compared with the ultrasonic pre-treatment method, the effect of ultrasonic coupling on electro-osmosis dehydration was more obvious.