Sci-Thur AM: Planning - 10: Improved dosimetric accuracy for patient specific quality assurance using a dual-detector...

The measurement of output factors for small fields is challenging and can lead to large dose errors in patient treatments if corrections for detector size and scatter from high-Z material are not applied. Due to its high spatial resolution and near tissue equivalence, GAFCHROMIC® film potentially provides a correction free measure of output factors but it can be challenging to obtain high quality dosimetric results using this film. We propose minimizing errors in the clinical determination of small field output factors by employing diode measurements with Monte-Carlo generated corrections for small fields ≤10 mm diameter and using small volume ion chambers for apertures >10 mm diameter with independent validation using radiochromic film. We performed patient specific quality assurance (QA) measurements for 9 patients using GAFCHROMIC® film and an A16 small volume ion chamber in a head-shaped phantom, employing this hybrid dual detector method for relative output factor measurements within the Multiplan treatment planning system. Our results suggest that consistent output factors can be determined using this method with experimental verification using GAFCHROMIC® film dosimetry. For the patient specific QA using film, we achieve good dosimetric agreement (<2σ) of the measured and calculated average dose for pixels within the 80% isodose line. For patient specific QA using the micro-ion chamber, we get good agreement (<3%) for cone sizes greater than 5 mm. The differences observed for the 5 mm cone plans are consistent with a 1 mm radial setup uncertainty for patient positioning using the Cyberknife system.