Related Experiment Video
Updated: Feb 23, 2026

Nanofabrication of Gate-defined GaAs/AlGaAs Lateral Quantum Dots
Published on: November 1, 2013
Extraordinary Transport Characteristics and Multivalue Logic Functions in a Silicon-Based Negative-Differential
Sejoon Lee1,2, Youngmin Lee3, Changmin Kim4
1Department of Semiconductor Science, Dongguk University - Seoul, Seoul, 04623, Korea. sejoon@dongguk.edu.
Abstract:
High-performance negative-differential transconductance (NDT) devices are fabricated in the form of a gated p+-i-n+ Si ultra-thin body transistor. The devices clearly display a Λ-shape transfer characteristic (i.e., Λ-NDT peak) at room temperature, and the NDT behavior is fully based on the gate-modulation of the electrostatic junction characteristics along source-channel-drain. The largest peak-to-valley current ratio of the Λ-NDT peak is greater than 104, the smallest full-width at half-maximum is smaller than 170 mV, and the best swing-slope at the Λ-NDT peak region is ~70 mV/dec. The position and the current level of the Λ-NDT peaks are systematically-controllable when modulating the junction characteristics by controlling only bias voltages at gate and/or drain. These unique features allow us to demonstrate the multivalue logic functions such as a tri-value logic and a quattro-value logic. The results suggest that the present type of the Si Λ-NDT device could be prospective for next-generation arithmetic circuits.
Related Concept Videos
Characteristics of MOSFET
Various vital parameters influence their functionality, which is crucial for theory and electronics applications. First, channel dimensions, precisely length, and width, are pivotal. The size of these channels affects the transistor's ability to carry current and switching speeds; shorter channels typically enable...
MOSFET: Depletion Mode
The primary characteristic of depletion-mode MOSFETs is their ability to conduct current between the drain and source terminals without gate bias. This inherent conductivity...
Semiconductors
Metals such as copper (Cu), zinc (Zn), or lead (Pb) have low resistivity and feature conduction bands that are either not fully occupied or overlap with the valence band, making a bandgap non-existent. This allows electrons in the highest energy levels of the valence band to easily transition to the conduction band upon gaining...
MOSFET: Enhancement Mode
In their basic form, enhancement-mode MOSFETs are typically non-conductive when the gate-source voltage (Vgs) is zero. This default 'off' state means no...
MOSFET
In an n-MOSFET, the structure includes n-type source and drain...
Small-Signal Analysis of MOSFET Amplifiers

